Monday, October 26, 2009

UCCX7.0 Windows 2003 Activation.

UCCX7.0 Windows 2003 Activation.

To install this following is the configuration.

I have Computer (desktop) with following configurations
1. Pentium 4 2.8 GHZ Intel Core 2 Duo.
2. 3.0 GB DDR2 RAM
3. 500 GB SATA HDD with 7500 RPM
4 1 Realtek Fast Ethernet Card
5. XP SP2
6. VMware Sever 1.0.6

Perquisites software
----------------------
1. Cisco OS 2003.
2. Windows OS 2003 with valid windows key.
3. UCCX 7.0



VMWare Configuration
------------------------
UCCX7.0 VM
---------
1. 2048 MB of RAM (after installation can be reduced to 712mb. for normal functions)
2. 100 GB of HDD with files splited into 2GB files Size (helps in Memory management)
3. Ethernet Card into Brigde mode with Network Subnet as Same as the HOST machine.

Steps of Installation
----------------------
1. Install cisco os 2003.
2. After cisco os is installed, Boot the image with Windows 2003 disk. Do a setup (repair).
3. Porvide the Windows 2003 Valid key when prompted.
3. Install UCCX.


Here is a Video for installation
----------------------------------
UCCX7 Win2k3Activation With Cisco OS 1.2
____________________________________________
http://rapidshare.com/files/298351950/UCCX7.Win2k3Activation.mp4


UCCX7 Win2k3Activation with Cisco OS 1.4
___________________________________________________
http://rapidshare.com/files/298944536/UCX7-CiscoOS1.4Win2k3Activation.mp4


Hope this helps.
Happy labbing
Posted by Chikkis at 4:09 PM 6 comments

Friday, October 23, 2009

Installing CUCM 7 Pub and Sub on VMware

To install this following is the configuration.

I have Computer (desktop) with following configrations
1. Pentium 4 2.8 GHZ Intel Core 2 Duo.
2. 3.0 GB DDR2 RAM
3. 500 GB SATA HDD with 7500 RPM
4 1 Realtek Fast Ethernet Card
5. XP SP2
6. VMware Sever 1.0.6

VMWare Configuration
------------------------
CUCM Pub VM
---------
1. 1024 MB of RAM (after installation can be reduced to 512mb. for normal functions)
2. 100 GB of HDD with files splited into 2GB files Size (helps in Memory management)
3. Ethernet Card into Brigde mode with Network Subnet as Same as the HOST machine.


CUCM Sub VM
---------
1. 1024 MB of RAM (after installation can be reduced to 512mb. for normal functions)
2. 100 GB of HDD with files splited into 2GB files Size (helps in Memory management)
3. Ethernet Card into Brigde mode with Network Subnet as Same as the HOST machine.


The most important
------------------
you need to manully add the Sub on the pub, via web admin.



here is a Video for installation
----------------------------------
http://rapidshare.com/files/297089369/CUCM-PUB-n-SUB.mp4


Installing CUCM Publisher in VMware
--------------------------------------



Installing a CUCM 7x Subscriber in ESX 3i Server
------------------------------------------------------



Hope this helps.
Happy labbing
Posted by Chikkis at 7:42 PM 0 comments
Labels: , , , ,

Sunday, October 18, 2009

CCIE Voice Lab v3.0 Equipment and Software List

Lab Equipment:

Cisco MCS-7845 Media Convergence Servers
Cisco 3825 Series Integrated Services Routers (ISR)
Cisco 2821 Series Integrated Services Routers (ISR)
ISR Modules and Interface Cards+ VWIC2-1MFT-T1/E1
- PVDM2
- HWIC-4ESW-POE
- NME-CUE
Cisco Catalyst 3750 Series Switches
IP Phones and Soft Clients
Software Versions

Any major software release which has been generally available for six months is eligible for testing in the CCIE Voice Lab Exam.

Cisco Unified Communications Manager 7.0
Cisco Unified Communications Manager Express 7.0
Cisco Unified Contact Center Express 7.0
Cisco Unified Presence 7.0
Cisco Unity Connection 7.0
All routers use IOS version 12.4T Train.
Cisco Catalyst 3750 Series Switches uses 12.2 Main Train
Network Interfaces

Fast Ethernet
Frame Relay
Telephony Interfaces

T1
E1
Posted by Chikkis at 7:01 AM 0 comments

Friday, October 9, 2009

Meeting Place Express 2.1.1.2 on VMWare

To install this following is the configuration.

I have Computer (desktop) with following configrations
1. Pentium 4 2.8 GHZ Intel Core 2 Duo.
2. 3.0 GB DDR2 RAM
3. 500 GB SATA HDD with 7500 RPM
4 1 Realtek Fast Ethernet Card
5. XP SP2
6. VMware Sever 1.0.6

VMWare Configuration
------------------------
MPX VM
---------
1. 2048 MB of RAM
2. 100 GB of HDD with files splited into 2GB files Size (helps in Memory management)
3. Ethernet Card # 1 - Brigde mode. IP Address : 192.168.2.15 /24
4. Ethernet Card # 2 - Brigde mode . IP Address : 192.168.2.16 /24.


here is a Video for installation
----------------------------------
http://rapidshare.com/files/290754027/MPX211-1.mp4
Downloads: 9

Hope this helps.
Happy labbing
Posted by Chikkis at 8:11 AM 5 comments

Friday, October 2, 2009

GNS3---QOS NBAR----Lab

Most CCIE’’s and CCIE candidates feel QoS is their hardest topic. if you ask me "yes it is". However to make thing easier, i have simulated an QOS lab on GNS3 which show how easily one can make a QOS LAB with GNS3.

I have impelemented the NBAR QOS for the demo.


I have Computer (desktop) with following configrations
1. Pentium 4 2.8 GHZ Intel Core 2 Duo.
2. 3.0 GB DDR2 RAM
3. 500 GB SATA HDD with 7500 RPM
4 1 Realtek Fast Ethernet Card
5. XP SP2
6. VMware Sever 1.0.6

CUCM VM
---------
1. 512 MB of RAM
2. 80 GB of HDD with files splited into 2GB files Size (helps in Memory management)
3. Ethernet Card - Custome VMNET1 HOST ONLY .Connected to HQ Router on GNS3.
4. IP Address Subnet - 192.168.2.X 255.255.255.0 (/24)

XP VM
-------
1. 256 MB of RAM
2. 80 GB of HDD with files splited into 2GB files Size (helps in Memory management)
3. Ethernet Card - Custome VMNET2 HOST ONLY. Connected to Branch router on GNS3.
4. IP Address Subnet - 10.10.210.X 255.255.255.0 (/24).

Here is the link
---------------------
GNS3-QOS-NBAR-Lab-01.avi
--------------------------
http://rapidshare.com/files/287797132/GNS3-QOS-NBAR-Lab-01.avi


Some Basics of QOS

QOS Tutorials Part01
QOS tutorials Part2

Happy Labbing
Posted by Chikkis at 11:11 AM 3 comments
Subscribe to: Posts (Atom)